There are many different ways to use biomass energy. Today, we are going to look at four different categories: biofuels, biopower, bioproducts, and space heating and cooling.
Biofuels
The two most common types of biofuels are ethanol and biodiesel. The most familiarly used form of ethanol ismade from the starch in corn grain, and it is added into petroleum-based fuels to reduce toxic air emissions and increase octane. It is also available as an alternative fuel known as E-85. This type of fuel contains 83% ethanol during the summer and 70% in the winter.
Biodiesel, on the other hand, is made from soybean oil. Though not as popular as its ethanol counterpart, it has significant benefits to air quality. Biodiesel is usually mixed at 20% with petroleum diesel, and it is called B-20. The same process that is used to create biofuels can also be used to create antifreeze, plastics, glues, artificial sweeteners and toothpaste gels.
Biopower/Biopower
The only renewable electrical generation that is used more than biopower is hydropower. Biomass is created using direct combustion using conventional boilers that burn waste wood products. Steam is produced by this combustion, which, in turn, spins a turbine, activating a generator that creates electricity.
When biomass is turned to gas prior to this combustion, toxic materials are removed from the process. These systems are useful for powering isolated communities with electricity. There are significant amounts of biomass resources in the eastern half of the United States.
Bioproducts
Bioproducts are products that can be made from fossil fuels. These products general require a reduced amount of energy to create than petroleum-based products. If oxygen is present when heating biomass, more of the two gases produced. This process is called biosynthesis, and it can be utilized to create plastics and acids. These, in turn, can be used to create photographic films, textiles, and synthetic fabrics.
On the other hand, when biomass is heated without oxygen, pyrolysis oil is formed and phenol can be extracted from this formation. Wood adhesives, molded plastics, and foam insulation can then be created from phenol.
Space Heating and Cooling
"Heating and cooling account for about 56% of the energy use in a typical US home, making it the largest energy expense for most homes." Because there are many options available in regards to heating and cooling, it is important to research the most efficient ways to utilize renewable energy. Whether you are installing the systems into a new home, or replacing the systems in an existing home, numerous choices are at your disposal.
Article Source: http://www.orbitaloc.com/
David Tanguay is dedicated to providing research, reviews & helpful information to consumers and businesses. For more information related to Green Energy and Biomass please visit greenenergyonline.org
Please Rate The Above Article From The Environment Category
Article Title: Ways to Use Biomass Energy
Not yet Rated
Syndicate Environment Related Articles Via RSS!
Subject to Orbitaloc.com's Publisher Terms of Service, you may reprint this
article on your own website, blog, and ezine. (English only) You may also syndicate
the article via Really Simple Syndication (RSS). It is free of charge.
Free Articles on Environment and Other FREE Content Article Topics
The preceeding is an informative article from the Environment category.
